首頁 » 產品介紹 » ResiScope模組

產品介紹

ResiScope模組
ResiScope模組
A dual measurement system :

1. Resistance measurement
2. Current measurement (& IV spectroscopy)
3. Compatible with Oscillating mode (Tapping / AC mode )
4. Compatible with EFM/MFM or Single-pass KFM
5. Resistance 102 ohms to 1012 ohms (10 decades dynamic)
6. Output information : R, Log R, Current & I/V Spectroscopy
概觀

The ResiScope II is a unique system able to measure AFM resistance over 10 decades with a high sensitivity and resolution. It can be combined with several dynamic modes as MFM/EFM (AC/MAC mode) or KFM single‐pass (AC/MAC III) providing several sample characterization on the same scan area.

Carbon black stripe , ResiScope mode, 60µm
Applications :

  • Photovoltaic          
  • Semiconductors     
  • Oxyde characterization
  • All conductive characterization

 

Intuitive software

  1.   Easy to use
  2.   Automatic mode selection
  3.   Configurable outputs
  4.   Selectable output scale : R | Log R | Current

AFM software

 

技術規格

Principle :
During the measurement, the DSP chooses in real time the best gain to optimize the measurement made by the amplifier module (HPA). This operating condition allows a very high sensitivity on all the range of resistivity at a regular scan speed (AFM) . Contrary to other techniques, the current between the probe and the sample is strongly reduced. This has the result of limiting the local effect of oxidation or electrochemistry and protecting the conductive probe from high current damage.

principle-resiscope

ResiScope is a smart real-time control of the appropriate ranges to obtain the best measurement (sensitivity and range). It limits the current through tip and sample is limited to prevent any damage. It is more than a simple linear or Log amplifier used for a basic current measurement

 


Specifications

Resistance range 10² Ω to 10^12 Ω
Current range (ResiScope mode) 50 fA to 1 mA
AFM compatibility CSInstruments : Nano-Observer
UHV : please contact us
Compatible AFM mode Contact / Tapping / AC mode EFM / MFM / KFM single-pass
Operating Environment Windows® XP. 7, 8, 10, 11, SP3 Framework DotNet 3.5 SP1
One USB port available
Power Supply AC 100‐240V 47‐63Hz, 1A The appliance must be properly grounded.
Weight (net) 2kg
 

 


如對此AFM有何技術上之問題或委測需求,歡迎來電: 02-2793-3133 或MAIL至 david.chang@utekmaterial.com

我們將為您提供最即時的諮詢與技術服務。

Top